Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Jul 19, 2025 6:51 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 41 posts ]  Go to page 1, 2  Next
Author Message
 Post subject:
PostPosted: Mon Dec 04, 2006 5:45 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Nov 26, 2005 7:32 pm
Posts: 1969
Location: United States
I'll be starting my 7th and 8th guitars this month. I'm going to make them with segmented rosett3es, a first for me.
I've been inspired by the threads over the past couple of months on this topic.
Rather than making a dedicated tool, I decided to make it be an add on to my recently completed table saw sled.
It is made from plywood, using threaded inserts and a 5/16 shoulder bolt for the pivot point. The angle and length are easily adjustable with the 1/4-20 thumb screws.

Here are some pictures with spalted maple -






    Here is my first one -







      A big imaginary bag of money goes to the first person to correctly identify the wood used on this rosette.   I have a section from the same log underneath it.

Any suggestion are welcome,
Thanks!

_________________
"An adventure is only an inconvenience rightly considered. An inconvenience is an adventure wrongly considered." G. K. Chesterton.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 5:54 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Nov 26, 2005 7:32 pm
Posts: 1969
Location: United States
[QUOTE=Hesh1956] Honduran Rosewood[/QUOTE] Nice try, but no. This one should be pretty hard. That is why I offered a big bag of money.

_________________
"An adventure is only an inconvenience rightly considered. An inconvenience is an adventure wrongly considered." G. K. Chesterton.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 6:00 am 
Offline
Walnut
Walnut

Joined: Thu Oct 19, 2006 3:56 am
Posts: 5
Looks like cedar from this angle.



Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 6:01 am 
Offline
Koa
Koa
User avatar

Joined: Wed Dec 29, 2004 3:48 pm
Posts: 1478
First name: Don
Last Name: Atwood
City: Arlington
State: Virginia
Country: USA
Focus: Build
Status: Amateur
Pink ivory?

_________________
Don Atwood
Arlington, VA


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 6:08 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Nov 26, 2005 7:32 pm
Posts: 1969
Location: United States
[QUOTE=csyvk] Looks like cedar from this angle.[/QUOTE] Nope.


[QUOTE=Don A] Pink ivory?[/QUOTE] Nope.

Did I mention this would be hard?

Let me know if you want some hints.

_________________
"An adventure is only an inconvenience rightly considered. An inconvenience is an adventure wrongly considered." G. K. Chesterton.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 6:43 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Nov 03, 2006 6:50 pm
Posts: 2711
Location: Victoria, BC
First name: John
Last Name: Abercrombie
Status: Amateur
Nice jig- Thanks for the pics- I'll be watching your progress as I'm thinking of making some solid/segmented rosettes as well.

My guesses on the wood are:
yew
aromatic cedar

John


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 6:45 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Sep 09, 2005 7:51 am
Posts: 3786
Location: Canada
You should add a toggle clamp for holding the piece down, added one to mine it makes it much harder to lose a finger !!!

_________________
Tony Karol
www.karol-guitars.com
"let my passion .. fulfill yours"


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 7:44 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Dec 25, 2005 6:32 am
Posts: 7774
Location: Canada
Aromatic cedar ?

Nice jig Steve, looking forward to see how nice it all turns out on the guitar!


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 7:56 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA
Bloodwood

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 8:12 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Nov 26, 2005 7:32 pm
Posts: 1969
Location: United States
[QUOTE=JohnAbercrombie]My guesses on the wood are:
yew
aromatic cedar

John[/QUOTE] Sorry John.


[QUOTE=JJ Donohue] Bloodwood[/QUOTE] No.

Anyone want a hint?

OK - Here is one - I have never heard of this wood that grows in the USA used on a guitar before.

_________________
"An adventure is only an inconvenience rightly considered. An inconvenience is an adventure wrongly considered." G. K. Chesterton.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 8:13 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Nov 26, 2005 7:32 pm
Posts: 1969
Location: United States
[QUOTE=TonyKarol] You should add a toggle clamp for holding the piece down, added one to mine it makes it much harder to lose a finger !!![/QUOTE] Tony,
That makes a lot of sense. I'll do that. Thank you, I was a bit nervous making those cuts.

_________________
"An adventure is only an inconvenience rightly considered. An inconvenience is an adventure wrongly considered." G. K. Chesterton.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 11:38 am 
Offline
Mahogany
Mahogany

Joined: Sat Jan 22, 2005 11:38 pm
Posts: 72
Location: United States
It looks kind of like some wood I cut from an oranamental cherry tree in my yard, except redder. Maybe plum?TomS39055.9024652778


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 11:57 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Jun 22, 2005 10:11 am
Posts: 2761
Location: Tampa Bay
First name: Dave
Last Name: Anderson
City: Clearwater
State: Florida
Zip/Postal Code: 33755
Country: United States
hmmm, Elm ?

_________________
Anderson Guitars
Clearwater,Fl. 33755


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 12:17 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Jul 28, 2006 4:06 pm
Posts: 170
Location: United States
Steve
Nice looking add on too your sled, I like jigs that
can do more than one thing.

My guess is Juniper.

Tom

_________________
http://www.moriciguitar.com


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 1:36 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jul 24, 2005 1:53 pm
Posts: 1075
Location: United States
First name: Coe
Last Name: Franklin
City: Decatur
State: IN
Country: USA
Locust?

_________________
Give me 50 cents worth of regular.
Check my oil too, if you don`t mind,,,


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 1:48 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Nov 26, 2005 7:32 pm
Posts: 1969
Location: United States
Good guesses guys, although none are correct.

Hint - it is a native American. There are about 60 varieties, and it does not get very tall.

_________________
"An adventure is only an inconvenience rightly considered. An inconvenience is an adventure wrongly considered." G. K. Chesterton.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 1:54 pm 
Offline
Walnut
Walnut

Joined: Mon Oct 23, 2006 6:22 am
Posts: 25
Location: Canada
dogwood??


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 1:56 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 24, 2005 4:53 am
Posts: 1584
Location: PA, United States
Steve,

I think I can identify the spalted maple from the adirondacks... Terry Stowell39055.9149421296


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 2:08 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Dec 25, 2005 6:32 am
Posts: 7774
Location: Canada
red maple?


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 2:11 pm 
Persimmon


Top
  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 2:20 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Tue Nov 21, 2006 4:55 pm
Posts: 376
Location: Canada
First name: Greg
Last Name: Harrington
Focus: Build
Status: Semi-pro
Sassafras

_________________
Greg
http://garibaldiinstruments.com/


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 2:24 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Nov 26, 2005 7:32 pm
Posts: 1969
Location: United States
[QUOTE=Terry Stowell] Steve,

I think I can identify the spalted maple from the adirondacks... [/QUOTE] I was hoping you'd say something. Yes, I'll be using that on another guitar I will be building at the same time.

_________________
"An adventure is only an inconvenience rightly considered. An inconvenience is an adventure wrongly considered." G. K. Chesterton.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 2:33 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Nov 26, 2005 7:32 pm
Posts: 1969
Location: United States
BTW- Keep guessing. No one has it yet.

_________________
"An adventure is only an inconvenience rightly considered. An inconvenience is an adventure wrongly considered." G. K. Chesterton.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 04, 2006 2:34 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Oct 06, 2005 1:05 pm
Posts: 3350
Location: Bakersville, NC
Focus: Build
Status: Professional
Red B....? or is it a Plum.... like a Purple Leaf Plum?
peterm39055.945775463

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 41 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com